DOI: 10.36347/sjds.2022.v09i02.002

Pages: 28-38

Objective: The corrosion behavior of titanium alloy (NiTi) orthodontic wires shows a high resistance to corrosion in various solutions, such as Ringer's solution, artificial saliva, sodium chloride solution, and others. In these different liquids, NiTi corrosion resistance is higher than that of stainless steel or cobalt-based alloys. These research studies the behavior of the nickel-titanium Orthodontics archwires in the mouth by three methods. Methods: The first testing was the SEM that can perform EPMA (Electro Probing Micro Analysis), microanalysis X, and local and quantitative elementary analysis, and the examination of NiTi are observed in two ways: cross sectional and surface examination. The second one was the electrochemical analysis performed by immersion in an artificial saliva solution consisting of lactic acid at 0.1 moles per liter and sodium chloride at 0.1 mole per liter: Two types of NiTi orthodontic arches were tested. The first ones are from the manufacturer Ortho Classic and were used in the mouth for 4-6 weeks. The second arches are from the manufacturer AZ Dent and were new. The last test was the TEM cartography that shows the atoms and their dispersion on the surface of the wire. Results: The results showed that the presence of corrosion cells in the artificial saliva proved that the NiTi orthodontic archwires were able to initiate the process of corrosion in the mouth, particularly at the point of friction in contact with the braces (Ti6Al4V). Conclusion: The results obtained by the MET on thin sections of orthodontic arches prepared by the FIB method revealed the presence of double or multiple layers of titanium oxide and N-oxide plus aluminum.